• Maintains the effectiveness of spray equipment
• Decontaminates sprayer after use
• It is especially effective at clearing sticky formulations (sulfonylurea (Group B) and carfentrazone-ethyl (Group G) herbicides)

• Concrete
• Asphalt
• Tarmac
• Block paving
• artificial sports surfaces
• Hard surfaces (except Marble and slate)

CLEANING PROCEDURE

Important: Any rinsate arising from spray tank cleaning should be disposed of on a crop approved for the products being used, not exceeding the maximum individual dose for that crop. Cleaning can be completed on an enclosed wash down area with water cleaning system.

• Immediately after spraying and completely emptying tank, hoses and booms. Wash any contamination on the outside of spraying  equipment with Sp0tless (50 ml in 10 L water)
• Rinse inside of tank with clean water and flush through hoses and booms using 10% of tank spray volume. Drain tank completely
• Half fill the tank with clean water and add Sp0tless Tank Cleaner at the selected rate. Agitate and briefly flush the hoses, boom and nozzles. Then completely fill tank with water and agitate for 15 minutes. Flush the hoses and spray all of the contents out through the boom. Drain the tank completely.

NOTE: If it is not possible to drain the tank completely, repeat step 3 before going on to step 4.mFor very large sprayers with internal sprinklers it is not necessary to completely fill the tank. With agitation and sprinklers running ensure contact time between the cleaning solution and all internal tank surfaces of 15 to 30 minutes. For extra resistant combinations, allow the cleaning solution to ‘sit’ for 24 hours to increase residue removal. If it is suspected hoses and spray lines are contaminated increase cleaning solution contact time to 48 hours.

• Nozzles, screens and filters should be cleaned with a fresh solution of Tank Cleaner and water (50 ml in 10L of water).
• Rinse the tank with clean water and flush through the hoses and boom. Drain the tank completely.
• Sample of final rinse may be applied to a susceptible plant to ensure total decontamination.

Download here

Updated - 29/06/2016